PU Decorative Cornice & Moulding - High-Density Polyurethane Trim for Interior Ceilings, Walls and Cabinetry
PU Decorative Cornice & Moulding - The Trim Schedule for Fit-out Contractors, Joinery Makers & Interior Designers
PU Decorative Cornice & Moulding is a high-density polyurethane trim system moulded from natural-material masters, engineered for interior fit-out contractors, joinery and cabinetry manufacturers, hotel and retail designers and decorating-material distributors. It reproduces carved plaster and timber profiles - cornice, cove, panel, picture-frame and skirting lines - at a fraction of their weight, without plasterwork on site. Trim arrives pre-primed and paintable, and cuts and fixes with standard carpentry tools and adhesive, so decorative detail can be delivered on a fit-out programme rather than as a wet trade.
A moulding schedule is a list of small items that decide how a room reads at the ceiling line and the skirting. Run a cornice that is out of proportion and the whole room feels wrong; get the shadow line right and a plain room looks finished. The profile is what the client notices, long after the paint colour has stopped being new.
Master profiles are taken from existing carved plaster and timber patterns, then reproduced as moulds. Each length is cast to a fixed profile and cut to a 2.4m standard, so a run of twelve pieces lines up without the profile drifting along the wall - which is what happens when a heavy trim is hand-formed on site.
Casting, priming, finishing and packing sit at one site in Hangzhou, eastern China, run by Hangzhou Feihuang Industry Co., Ltd. and traded internationally as naturwing. Because the profile library and the finishing line are the same operation, an architect's reference profile can be matched before the order is confirmed.
Key Product Specifications
|
Parameter |
Data |
|
Primary Buyer Types |
Interior Fit-out Contractors, Joinery & Cabinetry Manufacturers, Hotel & Retail Designers, Decorating-Material Distributors |
|
Key Export Markets |
Southeast Asia, Middle East, Western Europe, North America |
|
Material |
High-density polyurethane (PU) foam, moulded from master profiles |
|
Profile Types |
Cornice / crown, cove, panel moulding, wall waistline, edge line, frame line, picture frame, exterior window cornice |
|
Standard Length |
2.4m per piece (2,400mm specification); other lengths on request |
|
Surface |
Pre-primed white, paintable; available gold, silver, bronze, washed white |
|
Functions |
Fireproof, moisture-proof, soundproof, heat insulation, lightweight, corrosion-resistant, pest control, easy installation, environmental protection |
|
Certification |
ISO 9001 |
|
MOQ |
100 pcs |
|
Packing |
Polybag inside, carton outside |
|
HS Code |
3925900000 |
|
Production Capacity |
10,000 pcs/week (observed); production time 15–35 days by quantity |
|
Port |
Shenzhen, China |
Why Fit-out Buyers Use PU Cornice and Moulding
1. Carved Detail Without a Plasterer or Joiner on Site
Moulded PU reproduces the depth and shadow line of carved plaster cornice and timber trim, but installs with adhesive and a mitre saw rather than by hand-forming plaster or profiling timber.
Key Benefits:
No wet trade : the plasterer comes off the programme
No joinery fabrication : profiles arrive formed, not to be cut and shaped
Consistent along the run : twelve pieces share one profile
Adhesive and a mitre saw : standard tools, standard fixings
Why this matters to B2B buyers: Decorative mouldings usually sit on the critical path late in a fit-out. Removing the plaster trade removes the delay and its cost from the programme.
2. Feather-Light, Impact : Resistant and Safe on Ceilings
The low weight allows trims to be fixed to standard ceilings and drywall without additional framing, and the material resists knocks and chipping better than plaster or MDF.
Key Benefits:
No extra framing : standard ceilings take the weight
Handles knocks : lobbies and corridors survive trolley traffic
Safer overhead : light pieces are easier to hold while adhesive sets
Cuts clean : mitres stay crisp at the corner
Why this matters to B2B buyers: Added ceiling load means structural sign-off. A lightweight system avoids that approval step on refurbishment and hotel projects.
3. Pre-Primed and Paintable : Finish Matched to the Scheme
Trim arrives pre-primed white and accepts site paint in any colour, with gold, silver, bronze and washed-white factory finishes also available for feature schemes.
Key Benefits:
Primed on arrival : no preparation coat on site
Paint to the scheme : cornice can follow the ceiling or contrast with it
Metallic finishes : gold, silver and bronze for feature detailing
Washed white : a soft aged tone without hand-finishing
Why this matters to B2B buyers: A paint-ready trim lets the designer match cornice to ceiling and wall colours, which is why it is specified on hotel and retail interiors rather than limited to white.
4. Fireproof, Moisture : Proof and Pest-Resistant
PU does not support mould or insects and carries fire and moisture performance suited to interiors, including kitchens and bathrooms.
Key Benefits:
Wet-area capable : bathrooms and kitchens without a plaster breakdown
Pest-resistant : nothing for insects to feed on
Fire performance : stated for interior applications
Corrosion-resistant : stable in humid climates
Why this matters to B2B buyers: Mouldings are one of the first details to fail on tropical and coastal projects. A moisture- and pest-resistant material protects both the client's asset and the supplier's reputation.
5. Broad Profile Range at a Low Unit Price Point
Cornice, cove, panel, waistline, frame, picture frame, skirting and exterior window cornice profiles share one material family and one fixing method.
|
Certification |
Market / Standard |
Value for B2B Buyers |
|
ISO 9001 |
Worldwide |
System certification held for the moulding range |
|
Fire performance |
Worldwide |
Stated for interior use; documentation on request |
|
Moisture performance |
Worldwide |
Wet-area behaviour confirmed for bathrooms and kitchens |
|
Pest resistance |
Worldwide |
Material offers no food source to insects |
|
Environment |
Worldwide |
Stated as environmentally protective in the product data |
Key Benefits:
One schedule, one supplier : the whole moulding list from a single source
100 pcs MOQ : a catalogue line can be opened without a container commitment
10,000 pcs/week : weekly capacity behind a standing order
2.4m standard : splice-free runs on typical room lengths
Why this matters to B2B buyers: Mouldings are a low-value, high-line-count item, so range breadth and reliable weekly capacity matter more than unit price when a distributor is building a trim catalogue.
Pain Points
|
Pain Point |
How naturwing Solves It |
|
The plasterer is holding up handover |
Trim fixes with adhesive and a mitre saw |
|
Ceiling framing needs structural approval |
Light pieces hang on standard ceilings and drywall |
|
Cornice has to match a painted ceiling |
Pre-primed surface takes site paint in any colour |
|
Tropical humidity breaks the detail down |
The material ignores moisture and insects |
|
A catalogue needs twenty profile lines |
Cornice, cove, panel, waistline, frame and skirting from one source |
|
A standing order runs dry mid-project |
10,000 pcs/week observed capacity behind the line |
Application Scenarios
Residential
Kitchen worktops, islands and breakfast bars, bathroom vanities, utility and laundry tops
Commercial
Restaurant pass and bar counters, hotel bathroom vanities, café and bakery surfaces
Public Spaces
Hospital and clinic work surfaces, laboratory benching, canteen counters
Landscape Architecture
Reception and concierge counters, lift-lobby cladding, feature wall linings
Multi-Family
Apartment kitchen tops, shared laundry surfaces, serviced-apartment fit-outs
Installation Guide
Product Comparison: PU Moulding vs Plaster & Timber Trim
|
Feature |
Plaster Cornice |
Timber Moulding |
PU Moulding (naturwing) |
|
Site Trade |
Plasterer, wet mix |
Joiner, profiling |
Adhesive and a mitre saw |
|
Weight |
Heavy on the ceiling |
Heavy, needs fixing into structure |
Light, standard ceilings |
|
Programme |
Late, and weather dependent |
Joinery lead time |
Delivered with the fit-out |
|
Profile Consistency |
Hand-formed, varies |
Depends on the mill |
One mould, one profile |
|
Impact Tolerance |
Chips and cracks |
Dents and splits |
Resists knocks and chipping |
|
Wet Areas |
Breaks down |
Swelling at the ends |
Unaffected by moisture |
|
Unit Price |
High, labour-heavy |
High, material-heavy |
Low, catalogue-priced |
|
Range |
Limited to the plasterer's patterns |
Limited to the mill's knives |
Cornice, cove, panel, waistline, frame, skirting |
Company Strength
The moulding library and the finishing line sit at the same address in Hangzhou, eastern China, operated by Hangzhou Feihuang Industry Co., Ltd. and exporting as naturwing. A designer's reference profile can therefore be matched against the existing moulds, or a new master made, before the trim schedule is priced.
Our Manufacturing Capabilities:
Master profiles and moulds held in-house
Casting, priming, metallic finishing and packing on one site
New profile masters developed for a specification
Profile section checked along each cast length
Weekly output planned against standing catalogue orders
ISO 9001 system certification for the moulding range
Quality Assurance:
Profile section compared with the master along the full length
Primer coat checked for coverage before a length is packed
Metallic finishes compared with the approved coupon
Lengths measured against the 2.4m standard before cartoning
Corners tested with a trial mitre from each batch
Cartons checked for polybag protection and end protection
Ready to Build Your naturwing Moulding Schedule?
Send the drawing or the room dimensions, and tell us which profiles the scheme calls for. We will match against the existing moulds or quote a new master, then return a trim schedule with lengths and a piece count, priced at the catalogue tier.
Contact us today for:
Profile samples and a finish coupon in the tone you are specifying
A trim schedule - cornice, cove, panel, waistline, frame, skirting - counted off your drawing
A new profile master quoted from your reference
Catalogue pricing at the 100-piece tier, with standing-order terms
ISO 9001 documentation and product data for the specification pack
Our Certificates
FAQ
Q: How many pieces do I have to take?
A: 100 pieces for a first order. A standing catalogue line can then be replenished against observed capacity of 10,000 pieces a week.
Q: What profiles are in the range?
A: Cornice and crown, cove, panel moulding, wall waistline, edge line, frame line, picture frame, skirting and exterior window cornice. Reference an existing profile and we will match it, or send a drawing for a new master.
Q: What length does each piece come in?
A: 2.4m (2,400mm) as standard, with other lengths on request. A 2.4m piece usually covers a room side without a splice.
Q: How is it fixed?
A: Adhesive along both faces, with pins only where the substrate or the profile needs them. The pieces are cut on a mitre saw and fitted with standard carpentry tools.
Q: Does it come ready to paint?
A: It arrives pre-primed white. Gold, silver, bronze and washed-white factory finishes are also available where the design calls for a feature detail.
Q: Can it be used in bathrooms and kitchens?
A: Yes. The material takes moisture without breaking down, and it offers nothing for mould or insects to live on.
Q: Will it hold on a standard ceiling?
A: The pieces are light enough for standard ceilings and drywall without additional framing, which avoids a structural approval step on refurbishment work.
Q: How is it packed?
A: Polybag inside, carton outside. HS code 3925900000. Orders ship through Shenzhen.
Q: How long does production take?
A: 15–35 days depending on profile and quantity.
Hot Tags: pu decorative cornice & moulding, China pu decorative cornice & moulding manufacturers, suppliers, factory, plastic wood ceiling panels, price for pvc ceiling, pvc ceiling at builders, PVC Ceiling Panels Kitchen, pvc panel for outdoor, pvc panel for wall and ceiling
